Accessori Luci

Ingrandisci:

Convertitore DAP da XLR Femmina 3 poli a RJ45 Femmina per DMX512 - FLA39

(1)
5,80€

Convertitore da XLR Femmina 3 poli a RJ45 Femmina DAP FLA39 Easily convert Ethernet cabling to 3 pin XLR with this compact adaptor. Make use of existing ethernet cable runs or use these adaptors to easily link fixtures using ehternet connectors to 3 pin XLR fisxtures.   NOTE This converter is intended for DMX512 cabling..

Convertitore DAP da XLR Femmina 5 poli a RJ45 Femmina per DMX512 - FLA41

(1)
6,10€

Convertitore da XLR Femmina 5 poli a RJ45 Femmina DAP FLA41 Easily convert Ethernet cabling to 5 pin XLR with this compact adaptor. Make use of existing ethernet cable runs or use these adaptors to easily link fixtures using ethernet connectors to 5 pin XLR fixtures.   NOTE This converter is intended for DMX512 cabling ..

Convertitore DAP da XLR Maschio 3 poli a RJ45 Femmina per DMX512 - FLA38

(1)
5,65€

Convertitore da XLR Maschio 3 poli a RJ45 Femmina DAP FLA38 Easily convert Ethernet cabling to 3 pin XLR with this compact adaptor. Make use of existing ethernet cable runs or use these adaptors to easily link fixtures using ehternet connectors to 3 pin XLR fisxtures.   NOTE This converter is intended for DMX512 cabling ..

Convertitore DAP da XLR Maschio 5 poli a RJ45 Femmina per DMX512 - FLA40

(2)
5,90€

Convertitore da XLR Maschio 5 poli a RJ45 Femmina DAP FLA40 Easily convert Ethernet cabling to 5 pin XLR with this compact adaptor. Make use of existing ethernet cable runs or use these adaptors to easily link fixtures using ethernet connectors to 5 pin XLR fixtures.   NOTE This converter is intended for DMX512 cabling ..

Terminatore DMX 3 Poli

(0)
2,45€

Ideally, a DMX Data line will have a DMX Terminator connected across the two data wires. Without DMX Terminator, reflections can cause data corruption. The DMX Terminator also reduce electrical noise sensitivity due to the lower impedance.   Specifications: Without cable Connector: 3 pin XLR MaleImpedance: 110 Ohm  ..

Terminatore DMX 5 Poli

(0)
2,80€

Ideally, a DMX data line will have a DMX Terminator connected across the two data wires. Without DMX Terminator, reflections of fast driver edges can cause data corruption. The DMX Terminator also reduce electrical noise sensitivity due to the lower impedance.   Specifications: Without cable Connector: 5 pin XLR MaleImpedan..

Vis. da 1 a 6 di 6 (1 Pagine)